BNC Connector for CC Camera setup BNC Connector for CC Camera setup

BNC Connector for CC Camera setup

0/5

৳50.00 ৳100.00
In stock
BNC jack


BNC connector is used for CCTV camera and DVR system

The connector has a 50 Ω impedance and operates best in the 0–11 GHz frequency spectrum.

can operate up to 100 MHz and 100 volts

    • BNC connector for CCTV camera and DVR system is used to connect a variety ofdifferent coaxial cables. This connector has snap-lock superior architecture.
    • BNC connector for CCTV camera and DVR system.
    • They can operate up to 100 MHz and 100 volts. They cannot mate with ordinary BNC connectors.
    • In video broadcast industry, the DIN 1.0/2.3 and the HD-BNC connector are used for higher density products.
    • In video broadcast industry, the DIN 1.0/2.3 and the HD-BNC connector are used for higher density products.
    • The connector has a 50 Ω impedance and operates best in the 0–11 GHz frequency spectrum.
    the 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends but this is by no means reliable. There was a proposal in the early 1970s for the dielectric material to be coloured red in 75 ohm connectors, and while this is occasionally implemented, it did not become standard. The 75 ohm connectors are typically specified for use at frequencies up to 2 GHz. 75 ohm BNC connectors are primarily used in Video (particularly HD video signals) and DS3 Telco central office applications. Many VHF receivers use 75 ohm antenna inputs, so they often used 75 ohm BNC connectors. The 50 ohm connecto
  • Reviews (0)

  • Comments (0)

    Leave a comments